E-5010 MS Sedco 216 Series Infrared Touchless Switches

The 216 Series "touchless" switches are active infrared devices designed to activate full and low energy automatic doors. Hands-free operation makes these switches ideal for handicap accessibility and Knowing Act Doors. Other applications include bathroom door and clean room door activation where a sterile environment is needed. FACEPLATES AVAILABLE WITH LEGEND OR PLAIN

Retail Price - $215   Erich Price - $187

E-4020 & E-4030 MS Sedco 59R Series Stainless Steel Push Plates

The 59R Series switches combine architectural quality finishes with industrial grade components to provide attractive and reliable automatic door activation. The 59R Series features 4.5" or 6" round face plates in either stainless steel with an etched and paint filled legend or blue powder coated aluminum with an engraved legend. A 4.5" or 6" square formed stainless steel back plate eliminates possible wall damage from standard use.

4.5" Retail Price - $62   Erich Price - $56
6" Retail Price - $75   Erich Price - $68

E-3080 MS Sedco AccuGuard BP-2 Safety Beam System

The AccuGuard BP2 is a dependable and unobtrusive infrared safety beam system for use with any automatic pedestrian door. This modular system consists of a separate beam control module, two transmitter beam heads with cables and two receiver beam heads with cables. The beam heads are available for recess mounting (BP2) and Erich Industries, Inc. includes surface mount housings. When a beam is interrupted the beam control module signals the door control to open. In the event of a power loss to the AccuGuard BP2 the beam control module will also signal the door control to open thus providing a failsafe safety system. The AccuGuard BP2 is designed to save money on door preparation. It also provides for easier installation, quicker change-out and better aesthetic value.

Retail Price - $205   Erich Price - $181

• AUTOMATIC DOOR SENSOR BROKEN?
• WORRIED ABOUT INJURY OR LAWSUIT?
• AVOID EXPENSIVE SERVICE CALLS!
• ALL OUR SENSORS ARE IN STOCK!
• ASAP DELIVERY WITH NEXT DAY SHIP OPTIONS

E-3060 MS Sedco GD11S Infrared Safety Photocell

The GD11S is a self-contained surface mount active infrared safety beam system for interior or exterior use on any automatic pedestrian door, industrial door or gate. When the infrared beam is interrupted, the GD11S’ relay output signals an industrial door or gate control to open, stop or reverse. This is now a requirement of ANSI A156.10 2005. In the event of a power loss to the GD11S, the relay changes state (failsafe). The GD11S is supplied by Erich with the GDB quick mounting brackets for easy installation on industrial doors and gates.

Retail Price - $170   Erich Price - $141

 E-RLM MS Sedco Relay Lockout Module and Safety Beams

DESIGNED SPECIFICALLY FOR ANSI A156.10 2005 SWING DOOR REQUIREMENTS. The RLM uses Intelligent Door Position™ monitoring circuitry to automatically identify and swing door's open and closed positions and determine its closing time. The RLM then controls the approach sensor, overhead safety sensor and safety beams. The proprietary software monitors the door's position and controls when to inhibit the signal from the overhead safety sensor during the closing cycle while simultaneously monitoring the safety beams (included) and when to prevent reactivation of the approach sensor.

Retail Price - $225   Erich Price - $198

E-SAM MS Sedco Secondary Activation Module

DESIGNED SPECIFICALLY FOR ANSI A156.10 2005 KNOWING ACT SWING DOOR REQUIREMENTS. The SAM uses Intelligent Door Position™ monitoring circuitry to automatically identify and swing door's open and closed positions and determine its closing time. The SAM then controls the push plate switch (knowing act), approach sensor (secondary activation) and overhead safety sensor. The proprietary software monitors the door's position and controls when to turn on and off the approach sensor after the push plate is activated while simultaneously monitoring the overhead safety sensor and locking out its signal during the door's closing cycle.

Retail Price - $120   Erich Price - $111

E-Br3 BEA Logic Module

Contains logic for multiple applications including simple timing, door mounted sensor inhibiting and advanced relay sequencing. Multi-functionality offers increased value by combining legacy MC-Linx functionality in addition to new and more advanced functions for a variety of applications. Unit contains 3 relays; 2 large power relays and 1 small signal relay with built-in surge suppression in all 3 relays eliminating the need for external components when installing electric locking devices. Provides the ability to select a ‘WET’ voltage output of up to 1 AMP on Relay 1 to power electric locking devices without the need for an external power supply. Advanced input power circuitry for better protection, including a resetable fuse.

Retail Price - $108   Erich Price - $99

E-1010 Heavy Duty Push Button Switches

Exterior or Interior Applications
Momentary Contact
U.L. Rated 4, CSA Certified
Meets 1, 2, 3R, 4, 5, 6, 12, 13, and ICS NEMA Standards

1BX - Erich Price - $59
2BX - Erich Price - $69
3BX - Erich Price - $116

E-6010 CP2 & WP1 Heavy Duty Pull Cord Switches

Die Cast Aluminum Construction
Momentary Contact
U.L. Rated 3R, CSA Certified
Meets 1, 2, 3R, 4, 5, 6, 12, 13, and ICS NEMA Standards


CP2 Ceiling Mount  - Erich Price - $92
WP1 Wall Mount - Erich Price - $92